Display Explanations; Installing Batteries - Health O Meter 7633 Instruction Manual

Display Explanations

Display:
Icons:

Installing Batteries

1. Place your thumb on the side of the battery cover. Pull the battery cover in
the direction of the cuff to open.
2. Install lower battery first in the bottom position with the battery ribbon
underneath. Battery Type: 2 Alkaline (AAA) size.
3. Place in the other battery and pull up the battery ribbon over it.
4. Replace the cover by placing the end tabs of the battery cover in the slots
on the top of the battery compartment. Click in the other end to secure the
battery cover.
Systolic Pressure
Diastolic Pressure
Pulse Rate
No. of Memory Sequence
Appears when measurement value is stored
in memory or is recalled from memory
Appears when batteries should be replaced
Shows the Pulse Rate per minute
Occurs when an error was made during
measurement
9
1.
2.