Adjusting The Headlamps; Vertical Aim Adjustment - Ford Transit Connect Owner's Manual

2013
Hide thumbs Also See for Transit Connect:
Table of Contents

Advertisement

ADJUSTING THE HEADLAMPS

The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident, the alignment of your headlamps
should be checked by your authorized dealer.

Vertical Aim Adjustment

1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters) away.
D
C
2. Measure the height of the headlamp bulb center from the ground and
mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall
or screen at this height.
3. Turn on the low beam headlamps to illuminate the wall or screen and
open the hood.
To see a clearer light pattern for adjusting, you may want to block the
light from one headlamp while adjusting the other.
2013 Transit Connect (tst)
Owners Guide gf, 2nd Printing, November 2012
USA (fus)
Maintenance
• (A) 8 feet (2.4 meters)
A
• (B) Center height of lamp to
ground
• (C) 25 feet (7.6 meters)
• (D) Horizontal reference line
B
On the wall or screen you will
observe a flat zone of high intensity
light located at the top of the right
hand portion of the beam pattern.
If the top edge of the high intensity
light zone is not at the horizontal
reference line, the headlamp will
need to be adjusted.
189

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 transit connect

Table of Contents