Crestron CSA-ANT-EXTRNL-QMT50 Installation Manual

Crestron CSA-ANT-EXTRNL-QMT50
External Antenna for CSM-QMT50-DCEX
Installation Guide
Further Inquiries
To locate specific information or resolve questions after reviewing this guide, contact Crestron's True Blue Support at
1-888-CRESTRON [1-888-273-7876] or, for assistance within a particular geographic region, refer to the listing of
Crestron worldwide offices at www.crestron.com/offices.
To post a question about Crestron products, log onto Crestron's Online Help at www.crestron.com/onlinehelp.
First-time users must establish a user account to fully benefit from all available features.
Future Updates
As Crestron improves functions, adds new features, and extends the capabilities of the CSA-ANT-EXTRNL-QMT50,
additional information may be made available as manual updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete technical documentation revision.
Check the Crestron website periodically for manual update availability and its relevance. Updates are identified as
an "Addendum" in the Download column.
WARNING: To avoid fire, shock, or death; turn off power at circuit breaker or fuse and test that power is off before
wiring!
NOTES: Observe the following points.
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• This product should be installed by a qualified electrician.
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Installation Guide - DOC. 7521B
(2036363)
11.13
Specifications subject to
change without notice.
INTRODUCTION
The Crestron CSA-ANT-EXTRNL-QMT50 is an optional accessory for the
®
CSM-QMT50-DCEX QMT™ shade motor with infiNET EX
external antenna is recommended for applications where the shade is recess mounted in a
pocket, or anywhere the integrity of the wireless signal may be compromised by some
obstruction or excess distance.
The CSA-ANT-EXTRNL-QMT50 comes in white and can be painted to blend with the
surrounding decor for an inconspicuous installation. It is designed for mounting to a flat
surface outside of the pocket in which the shade is installed, or near the opening at the
bottom of the pocket. It includes an integral 8 inch (204 mm) wire lead with right-angle
MMCX coaxial connector for connection to the shade motor.
Physical Description
This section provides information on the dimensions for the CSA-ANT-EXTRNL-QMT50.
Dimensional Drawing
3/4 in
(19 mm)
2 in
(51 mm)
1/2 in
(12 mm)
INSTALLATION
Follow the instructions below to wire the CSA-ANT-EXTRNL-QMT50 to a
CSM-QMT50-DCEX motor and mount to a surface.
Wiring
Plug the connector at the end of the wire lead into the 2-pin connector on the
CSM-QMT50-DCEX motor as shown in the following illustration.
Wiring CSA-ANT-EXTRNL-QMT50 to CSM-QMT50-DCEX Motor
Mounting
NOTE: Test the signal at the mounting location before permanently mounting the
antenna.
Mount the antenna outside of the pocket or, at a minimum, near the opening of the bottom
of the pocket so that it is able to receive ample infiNET EX signal for motor control. Use the
included 3M Dual Lock reclosable fastener to mount the antenna to the mounting surface.
® ®
wireless communication. The
®
8 in
(204 mm)