Electrical System; Electrical System Overload; Replacement Bulbs - Cadillac 2014 SRX Owner's Manual

4. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
5. Pull the bulb (2) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install into the lamp assembly.
7. Turn the lamp assembly into the
liftgate, engaging the clip side
first.
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Back-up Lamp
Daytime
Running Lamp
Headlamp
High-Beam
Headlamp
Low-Beam
License Plate Lamp
Turn Signal Front
Tail/Turn
Signal Rear
For replacement bulbs not listed
here, contact your dealer.
The vehicle has fuses and circuit
breakers to protect against an

electrical system overload.

Hyperclick
When the current electrical load is
PH16W
too heavy, the circuit breaker opens
7443 ULL
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
9005LL
greatly reduces the chance of circuit
overload and fire caused by
H11LL
electrical problems.
Fuses and circuit breakers protect
W5WLL
power devices in the vehicle.
7444NA
Replace a bad fuse with a new one
of the identical size and rating.
7440
If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.