The removal of the underhood
electrical center is required for the
replacement of one of these bulbs:
1. Open the hood. See
.
Liquids from environment or
spillage and/or tools placed on
top of or used in the underhood
electrical center while the cover is
removed can pose a risk of
electrical shock/burn to anyone in
the vicinity. These conditions can
also cause damage to electrical
components on the vehicle. Keep
liquids and tools away from the
underhood electrical center when
the cover is removed.
2. Unlatch three clips and lift up the
underhood electrical center
cover to remove.
The removal of the air filter/cleaner
assembly and base is required for
the replacement of one of these
bulbs:
1. Open the hood. See
.
2. Remove the air cleaner/filter
cover. See
3. Lift the air cleaner/filter base to
disengage from the three pins.
1. From the back side of the
headlamp assembly, remove the
top cap to replace the low-beam
headlamp/DRL bulb.
.