Cleaning Exterior Lamps/Lenses, Emblems, Decals And Stripes - Cadillac 2014 CTS Owner's Manual

The bright metal moldings on the
vehicle are aluminum. To prevent
damage always follow these
cleaning instructions:
Be sure the molding is cool to
the touch before applying any
cleaning solution.
Use a cleaning solution
approved for aluminum. Some
cleaners are highly acidic or
contain alkaline substances and
can damage the moldings.
Always dilute a concentrated
cleaner according to the
manufacturer s instructions.
Do not use chrome cleaners.
Do not use cleaners that are not
intended for automotive use.
Use a nonabrasive wax on the
vehicle after washing to protect
and extend the molding finish.
Use only lukewarm or cold water, a
soft cloth, and a car washing soap
to clean exterior lamps, lenses and
emblems. Follow instructions under
"Washing the Vehicle" previously in
this section.
Lamp covers are made of plastic,
and some have a UV protective
coating.
Use only lukewarm water, a soft
cloth, and mild car washing soap to
clean exterior lamps and lenses. Do
not clean or wipe them while they
are dry.
Do not use any of the following on
lamp covers:
Abrasive or caustic agents.
Washer fluids and other cleaning
agents in higher concentrations
than suggested by the
manufacturer.
Solvents, alcohols, fuels,
or other harsh cleaners.
Ice scrapers or other hard items.
Aftermarket appearance caps or
covers while the lamps are
illuminated, due to excessive
heat generated.
Failure to clean lamps properly
can cause damage to the lamp
cover that would not be covered
by the vehicle warranty.
Using wax on low gloss black
finish stripes can increase the
gloss level and create a
non-uniform finish. Clean low
gloss stripes with soap and
water only.