Cadillac 2014 CTS Owner's Manual page 229

®
If the StabiliTrak system begins to
limit wheel spin while using cruise
control, the cruise control
automatically disengages. See
. If a collision
alert occurs when cruise control is
activated, cruise control is
disengaged. See
When road conditions allow the
cruise control to be safely used, you
can apply the cruise control again.
(On/Off): Press to turn the
cruise control on and off. A white
cruise control indicator appears in
the instrument cluster when cruise
is turned on.
+RES (Resume/Accelerate):
Press the control up briefly to +RES
to make the vehicle resume to a
previously set speed or press and
.
hold to accelerate. If cruise control
is already active, use to increase
vehicle speed. To increase speed by
1 km/h (1 mph), press +RES up to
the first detent. To increase speed to
the next 5 km/h (5 mph) mark on the
speedometer, press +RES up to the
second detent.
SET (Set/Coast): Press the
control down briefly to SET to set
the speed and activate cruise
control. If cruise control is already
active, use to decrease vehicle
speed. To decrease speed by
1 km/h (1 mph), press SET down to
the first detent. To decrease speed
Driving and Operating
to the next 5 km/h (5 mph) mark on
the speedometer, press SET down
to the second detent.
(Cancel): Press to disengage
cruise control without erasing the
set speed from memory.
Setting Cruise Control
If the cruise button is on when not in
use, it could get bumped and go into
cruise when not desired. Keep the
cruise control button off when cruise
is not being used.
1. Press .
2. Get up to the desired speed.
3. Press and release the SET
control on the steering wheel.
4. Remove foot from the
accelerator.
When the cruise control has been
set to the desired speed, the cruise
control indicator appears green on
the instrument cluster and a cruise
set speed message appears on the
Head-Up Display (HUD),
if equipped.
9-35