Steps For Determining Correct Load Limit - Cadillac 2014 CTS Owner's Manual

9-12 Driving and Operating
2. Maximum Vehicle Capacity
Weight
3. Size of the Original Equipment
Tires
4. Recommended Cold Tire
Inflation Pressure
A vehicle-specific Tire and
Loading Information label is
attached to the vehicle's center
pillar (B-pillar). The Tire and
Loading Information label shows
the number of occupant seating
positions (1), and the maximum
vehicle capacity weight (2) in
kilograms and pounds.
The Tire and Loading
Information label also shows the
tire size of the original
equipment tires (3) and the
recommended cold tire inflation
pressures (4). For more
information on tires and inflation
see
There is also important loading
information on the Certification
label. It tells you the Gross
Vehicle Weight Rating (GVWR)
and the Gross Axle Weight
Rating (GAWR) for the front and
rear axle. See Certification
Label later in this section.
Steps for Determining Correct
Load Limit
Locate the statement "The
1.
combined weight of
occupants and cargo should
never exceed XXX kg or
XXX lbs." on your vehicle s
placard.
Determine the combined
2.
weight of the driver and
passengers that will be riding
in your vehicle.
Subtract the combined
3.
weight of the driver and
and
passengers from XXX kg or
.
XXX lbs.
The resulting figure equals
4.
the available amount of cargo
and luggage load capacity.
For example, if the "XXX"
amount equals 1400 lbs. and
there will be five 150 lb
passengers in your vehicle,
the amount of available cargo
and luggage load capacity is
650 lbs. (1400-750 (5 x 150)
= 650 lbs.)
Determine the combined
5.
weight of luggage and cargo
being loaded on the vehicle.
That weight may not safely
exceed the available cargo
and luggage load capacity
calculated in Step 4.
If your vehicle will be towing
6.
a trailer, load from your trailer
will be transferred to your
vehicle. Consult this manual
to determine how this