Reducing Speed While Acc Is At A Set Speed; Selecting The Follow Distance - Cadillac 2014 CTS Owner's Manual

Hide thumbs Also See for 2014 Cadillac CTS:
Table of Contents

Advertisement

9-40
Driving and Operating
(DIC) and the Head-Up Display
(HUD) (if equipped). See
Press and hold +RES up until
the desired set speed appears
on the display, then release it.
To increase vehicle speed in
small increments, press +RES
up to the first detent. For each
press, the vehicle goes 1 km/h
(1 mph) faster.
To increase vehicle speed in
larger increments, press +RES
up to the second detent. For
each press, the vehicle speed
increases to the next 5 km/h
(5 mph) mark on the
speedometer.
When it is determined that there is
no vehicle ahead or the vehicle
ahead is beyond the selected
following gap, then the vehicle
speed will increase to the set speed.
The speedometer reading can be
displayed in either English or metric
.
units. See
. The increment value
used depends on the units
displayed.
Reducing Speed While ACC is at a
Set Speed
If ACC is already activated, do one
of the following:
Use the brake to get to the
desired lower speed. Press
SET down and release the
accelerator pedal. The vehicle
will now cruise at the lower
speed.
Press and hold SET down until
the desired lower speed is
reached, then release it.
To decrease the vehicle speed in
smaller increments, press SET
down to the first detent. For
each press, the vehicle goes
about 1 km/h (1 mph) slower.
To decrease the vehicle speed in
larger increments, press SET
down to the second detent. For
each press, the vehicle speed
decreases to the next 5 km/h
(5 mph) mark on the
speedometer.
The speedometer reading can be
displayed in either English or metric
units. See
. The increment value
used depends on the units
displayed.

Selecting the Follow Distance

When a slower moving vehicle is
detected ahead within the selected
following gap, ACC will adjust the
vehicle's speed and attempt to
maintain the follow distance gap
selected.
Press
on the steering wheel to
adjust the following gap. Each press
cycles the gap button through three
settings: Far, Medium, or Near.

Advertisement

Table of Contents
loading

Table of Contents