Unpacking The Access Point; Package Contents; Optional Equipment - Cisco Aironet 1550 Series Getting Started Manual

3

Unpacking the Access Point

Follow these steps to unpack the access point:
Step 1 Open the shipping container and carefully remove the contents.
Return all packing materials to the shipping container and save it.
Step 2
Step 3 Ensure that all items listed in the
shipment. Check each item for damage. If any item is damaged or missing, notify your
authorized Cisco sales representative.

Package Contents

Each access point package contains the following items:
• One 1550 series access point
• Three liquid-tight adapters
• Two-pin DC power connector
• Ground lug (Panduit PLCD6-10A-L) and screws with lock washers
Watertight cable glands for Power-over-Ethernet (PoE) ports (depending on the 1552 access point
•
model, 2 or 3 cable glands are provided)
Cisco product documentation and translated safety warnings
•

Optional Equipment

Depending on what you ordered, the following optional equipment may be part of your shipment:
• External antennas, depending on which ones you purchased
• Strand mount kit (AIR-ACCSMK1550=)
• Pole mount kit (AIR-ACCPMK1550=)
• Band installation tool for pole mount kit (AIR-BAND-INS-TL=)
• AC power cord, 40 ft. (12.2 m) with North American plug (AIR-CORD-R3P-40NA=)
• AC power cord, 40 ft (12.2 m) with European unterminated end (AIR-CORD-R3P-40UE=)
• Street light power tap (AIR-PWR-ST-LT-R3P=)
• Power injector (AIR-PWRINJ1500-2=)
6
"Package Contents" section on page 6 are included in the