Cisco Aironet 1550 Series Getting Started Manual page 20

Outdoor mesh access point
Hide thumbs Also See for Aironet 1550 Series:
Table of Contents

Advertisement

The low profile integrated antennas are attached to the bottom of a Cisco access point. The 1552C comes
with the option of a C-bracket for strand mounting. The 1552C mesh access point chassis mounting
brackets and low profile antenna all fit within the 30 cm vertical right-of-way for cable strand-mounted
equipment. The antennas are internally connected to the diplexer ports of the outdoor mesh access point
2.4/5 GHz 2x3 MIMO radios.
Figure 12
shows an installed integrated low-profile dual-band (2.4 GHz and 5.25 GHz) 3-element array
antenna. It is available on models AIR-CAP1552I-x-K9 and AIR-CAP1552C-x-K9.
Figure 12
Access Point Cisco Integrated Low-Profile Dual-Band 2.4/5 GHz Omni Antenna Array –
Built-In on Models AIR-CAP1552C-x-K9 and AIR-CAP1552I-x-K9
Integrated Low-Profile Dual-Band 2.4/5 GHz
1
Omni Antenna Array Unit
Antenna element (RX only)
2
20
2
3
3
4
4
1
Antenna element (TX/RX)
Antenna element (TX/RX)

Advertisement

Table of Contents
loading

Table of Contents