Playing Mp3 And Picture Files - Akai ACVDS820T Operator's Manual

PLAYING MP3 AND PICTURE FILES

This unit can play MP3 and Picture files recorded on CD-R and CD-RW discs.
PLAYING A MP3 / PICTURE FILE DISC
1. Press the button and hold the front panel to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle, with the label side facing
the front, until you hear a "click".
3. Push the disc door gently to close it.
4. The unit will take a short while to load the disc, automatically begin playback. The
MP3 files or Picture files will be playback one by one.
5. Press the STOP button to go to the folder list.
6. Press the or button to highlight a file to play. Press the
back.
Note:
• You can press the
to resume playback.
• You also can use the GOTO function or use the numbered buttons to enter the image
number to quickly select any image.
• Press the ANGLE button on the remote control to rotate the picture orientation by
90°.
Playable files
The ability of this unit to read MP3 discs is dependent on the following:
• the Bit rate must be within 64 - 256 kbps.
• the total number of files on the disc should not exceed 254.
• the maximum number of directories should not exceed 32.
• the maximum depth level of directories should not exceed 4.
• file names should be named using 7 or fewer letters and / or numbers, and must in-
corporate the "MP3" file extension. EXAMPLE: *******. MP3 where each * is a letter or
number.
• Use only letters and / or numbers in file names. If you use special characters, the file
and/or folder names may not be displayed correctly on the on-screen display.
• When recording on CD-r discs, use 74-minute (650mB) discs.
• the CD-r or CD-rW discs should be "finalized" in the computer by "single session
format" with recording speed less than "8X".
• see your CD / mP3 creation software for details.
PAUSE button to interrupt playback, and press the
GB - 18
PLAY button to start play-
PLAY button