Control Knobs; Glass Control Panel - GE JP626WFWW Owner's Manual & Installation Instructions

Electric built-in cooktop
Hide thumbs Also See for JP626WFWW:
Table of Contents

Advertisement

Available languages

Available languages

Care and cleaning of the cooktop.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
Molded rib
Spring
clip
Clear groove
6
How to Remove Packaging Tape
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape on
new appliances is an application of a
household liquid dishwashing detergent,
mineral oil or cooking oil.

Glass Control Panel

The glass control panel on your cooktop has been
tempered to withstand sudden temperature
changes during cooking. Give it the normal care
you would give any glass material.
While it is impact-resistant, avoid
scratching it to prevent it from shattering.

Control Knobs

The control knobs may be removed for easier
cleaning.
Make sure the knobs are in the OFF
positions and pull them straight off the
stems for cleaning.
Apply with a soft cloth and allow to soak.
Wipe dry and then apply an appliance
polish to thoroughly clean and protect
the surface.
NOTE: The plastic tape must be removed from all
chrome trim. It cannot be removed if it is baked on.
If the glass is hot, wipe up spills with a dry
cloth or paper towel. When the surface
has cooled, wash, rinse and dry it.
Alternately, when the glass is cool, spray it
with glass or window cleaner. Avoid the
use of cleaning powders or harsh
abrasives that may scratch the surface.
The knobs can be cleaned in a
dishwasher or they may also be washed
with soap and water. Make sure the insides
of the knobs are dry before replacing.
Replace the knobs in the OFF position
to ensure proper placement.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Jp328Jp626

Table of Contents