Cisco TelePresence PrecisionHD 1080p12x Installing page 2

Installing Cisco TelePresence PrecisionHD Camera - 1080p12x
Daisy chaining cameras
Example. Shown here are four
PrecisionHD 1080p 12X cameras
in cascade, connected to four
HDMI video input connectors of a
C-series codec.
HDMI and HD-SDI. HDMI and HD-
SDI can be used simultaneously on
the same camera.
Power. The first camera in the
chain gets its power from the
codec through the VISCA camera
control cable. Additional cameras
must use the 12 V Power in.
dc
Connect to the Camera
Daisy chaining cable. The daisy control socket on the
chained cameras are connected codec. When used with
by using the daisy chaining cable a C-series codec, this
between the Daisy chain out and first camera will need no
Codec control in sockets. power supply connected.
Mounting the camera upside down
The camera may also be mounted upside The orientation of the camera is
down. This may bring camera and monitor automatically detected when the camera
closer together and thus contribute to a is powered—no manual setup is required
better feeling of eye-contact between the in order to display the image correctly on
video meeting participants. screen.
78-19791-02 PrecisionHD Camera - 1080p12x Installation Sheet | February 2013 | © 2010-2013 Cisco Systems, Inc. All rights reserved.
RJ11–RJ45
12 V
dc
Connect to Video input 1 on codec. Connect to Video input 2 on codec.
Page 2
RJ11–RJ45
12 V
dc
RJ11–RJ45
Connect to Video input 3 on codec.
User documentation
The user documentation for this product is found on the Cisco web site.
Go to:
For details about how to connect PrecisionHD cameras to different codecs,
see the camera user guide on:
http://www.cisco.com/en/US/products/ps11335/products_user_guide_list.html
12 V
dc
Connect to Video input 4 on codec.
http://www.cisco.com/go/telepresence/docs