Drum Refresh - Olivetti d-Copia 300 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS

5. Drum refresh

Perform the following procedure if the copy image becomes blurred or
if white spots which are not on the originals appear on the copies. The
drum refreshing operation will take approximately 5 minutes.
1 Set 11" x 8 ", 11" x 17", A4 or A3 size paper on the multi-
1/2
bypass tray.
2 With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
3
Touch the "User adjustment" key.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
7-90
Language Management
Bypass BOX Counter
setting Management check
Register Print User
orig. size report Adjustment
Language Management
Bypass Hard Disk Counter
setting Management check
Register Print User
orig. size report Adjustment
4 Use the keypad to enter the 4-digit management code.
The factory default setting for 30 cpm copiers is "3000", for
40 cpm copiers is "4000" and for 50 cpm copiers is "5000".
If the entered code matches the registered one, the "User
adjustment" screen will be displayed.
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
5 Touch the "Drum refresh" key. The "Drum refresh" screen will
be displayed.
Inch specifications
End
Default setting / Counter
User adjustment
Default setting
Metric specifications
End
Default setting / Counter
User adjustment
Default setting
Drum
refresh
Drum
refresh
Close
Close
Close
Close