Table of Contents
Advertisement
Step : 1 Connections ( Essential)
Connect your aerial cable socket to the back of the TV set.
AV2
Connect the power cord of the TV set to a wall outlet.
The TV set is prepared for a mains voltage AC220~240V, 50Hz
and is fitted with a single pole mains ON/OFF switch. To com-
pletely switch off from the mains, or when the TV set is not to be
used for an extended period of time it is advisable to disconnect
the power cord from the power outlet.
For all aerial problems please consult your local dealer.
WARNING! High voltages are used in the operation of
this set. Refer service to qualified service personnel.
Connecting DVD / VCR player/ Satellite receiver
or Set top box.
We recommend that you connect all other equipment before Plug
and Play. The following examples are our recommended standard
connection. For further information please consult your local dealer.
TV
AV2
Option if no DVD
VCR
Set top box
or
TV
VCR
Satellite
DVD
Please refer to individual Instruction Manuals for each piece of
equipment for their connection suggestions.
Step : 2
Remote control battery installation
Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on
the batteries match the "+" and "-" marks inside the unit into the
remote control handset.
INST
INST
AV1
ANT.75
AV1
ANT.75
OUT
IN
OUT
DISH
IN
IN
For Satellite
only
ALLA
TION
ALLA
TION
Step : 3
Switching on / Plug & Play
Press the Mains on off switch on the front of the TV set.
This TV set provides a self- automatic
tuning function called Plug and Play which
automatically searches and stores all of
the available TV stations in your reception
area.
A welcome message will appear, once this has finished the
following screen appears.
Thank you for purchasing your
SANYO TV.
Now I am searching and storing
all the programmes. Please wait.
To remove the completed message press the MENU button.
Now the installation is complete!
After Plug & Play the TV set will automatically sequence the follow-
ing major stations in the UK starting from programme position 1.
BBC1
BBC2
ITV
CH4
CH5
SKY, BBC-World, or BBC-Prime.
Any other channels found will be stored sequentially as they are
found after the major stations.
If you move to another city or cable is installed, please follow the
description "PRESET". (on page 6).
This procedure only appears the first time you switch on.
TV front controls / Terminals
Press the 5 and 6 buttons to increase or decrease the
programme position.
Press the 1 or 2 buttons to increase or decrease the sound
volume.
Front terminals
To select the AV3 mode press the v button repeatedly.
When the headphones are inserted the sound from the TV
speakers is muted.
Headphone
Jack
Auto set-up completed.
Happy viewing!
P
AV3 Video/ Audio-input Jacks
Camcorder
From Camcorder
or video game
equipment
Game
equipment
3
Advertisement
Table of Contents
