Removing The Transceiver - Cisco MGBBX1 Quick Start Manual
1000 base-bx mini-gbic sfp transceiver 100 base-bx mini-gbic sfp transceiver 1000 base-lx mini-gbic sfp transceiver 100base-fx mini-gbic sfp transceiver 100base-lx mini-gbic sfp transceiver gigabit sx mini-gbic sfp transceiver gigabit lh mini-gbic sfp tra
Advertisement
Removing the Transceiver
2
Removing the Cisco MGBBX1, MFEBX1, MGBLX1, MFEFX1,
MFELX1, MGBSX1, and MGBLH1
Optical SFPs use a small laser to generate the fiber-optic signal.
W
ARNING
Because invisible laser radiation may be emitted from the
aperture of the port when no fiber cable is connected, avoid
exposure to laser radiation and do not stare into open
apertures. Keep the optical transmit and receive ports covered
whenever a cable is not connected to the port.
Press the fiber cable's connector and pull to remove the fiber cable
S
1
TEP
from the mini-GBIC SFP module.
Cisco Mini-GBIC SFP Transceiver Quick Start Guide
5
Advertisement
