Ford F-150 Owner's Manual page 241

Changing the Set Speed
Note: If you accelerate by pressing the accelerator pedal, the set speed
will not change. When you release the accelerator pedal, you will return
to the speed that you previously set.
• Press and hold SET + or SET –. Release the control when you reach
the desired speed.
• Press and release SET + or SET –. The set speed will change in
approximately 1 mph (2 km/h) increments.
• Press the accelerator or brake pedal until you reach the desired
speed. Press and release SET +.
Canceling the Set Speed
Press CNCL or tap the brake pedal. You will not erase the set speed.
Resuming the Set Speed
Press and release RSM.
Switching Cruise Control Off
Note: You will erase the set speed if you switch the system off.
Press and release OFF or switch the ignition off.
2013 F-150 (f12)
Owners Guide gf, 1st Printing
USA (fus)
Cruise Control 241