Bosch DIP-3042-2HD Installation Manual page 14

14 en | System setup - first steps DIVAR IP 3000
Network settings: page
You configure the network settings of the operating system.
As soon as you click Next button, the settings are activated.
Notice!
If a DHCP server is employed in the network for the dynamic assignment of IP addresses,
activate acceptance of IP addresses automatically assigned to the device.
Certain applications (VRM, Bosch Video Management System, Bosch Video
Client,Configuration Manager) use the IP address for the unique assignment of the device. If
using these applications, the DHCP server must support the fixed assignment between IP
address and MAC address, and must be appropriately set up so that, once an IP address is
assigned, it is retained each time the system is rebooted.
2013.05 | V1 | DOC Installation Manual Bosch Sicherheitssysteme GmbH