Camera Configuration; Osd Menu Structure - Bosch AN traffic 4000 IR User Manual

960h ir license plate bullet camera
Hide thumbs Also See for AN traffic 4000 IR:
Table of Contents

Advertisement

13
en | OSD menu structure
8

Camera configuration

After the camera is properly installed, the focus and zoom should be adjusted,
and OSD menu should be configured to optimize the camera's performance. To
enter the OSD menu, press the OSD joystick located on the rear of the camera.
Step1: The first time the camera is turned on, the camera is in installation mode. In this mode,
the camera will display the complete monochrome picture (not only the license plate).
This will help to correctly aim and focus the camera on the target object. If the camera
is not in installation mode, change MODE from LICENSE-PLATE to INSTALLATION in the
OSD menu.
Step2: Adjust the zoom and focus (and camera position if needed) to the target object.
Step3: Change the camera mode from INSTALLATION to LICENSE-PLATE in the OSD menu. In
this mode, the camera will only display reflective objects such as the license plate.
Step4: Adjust the SHUTTER value (= shutter speed) in order to prevent over- or underexposure
of the license plate. In applications with short capture distance, the IR intensity may be
reduced by lowering the LED level in the OSD menu to further prevent overexposure.
Note that if the camera is installed outdoors, the license plate image may be slightly
different during daytime and nighttime. This effect will increase when lowering the LED
level, or when using a long capture distance.
Step5: If required, the image may be inverted by turning on NEGATIVE in the OSD menu.
In negative mode, light areas in the image will appear dark and vice versa. In some
applications this may improve the readability of the license plate.
Step6: Exit the OSD menu.
9

OSD menu structure

MAIN MENU 1st Sub
MODE
SHUTTER
NEGATIVE
LED LEVEL 0~10
LANGUAGE English, Russian, Spanish, German, French, Portuguese
EXIT
* SHUTTER:
Bosch Security Systems
INSTALLATION
LICENSE-PLATE
---- (INSTALL MODE)
1/250, 1/500,
1/1000~1/10000 (adjusted 1/500sec measure)
1/30K,1/50K,1/70K,
1/90K, 1/100K
OFF
ON
adjusted when LICENSE-PLATE MODE is performed.
User Manual
960H IR License Plate Bullet Camera
2012.11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents