Andset; Peakerphone Peration; Making A Call - GE 28213 Series User Manual

Handset
The TALK/SPEAKER indicator buttons flash when you receive a call and remain lit
during a call.
The keypad and CID will also light when a call is received.
VMWI / Visual Ringer Indicator on Handset
IMPORTANT: In order to use this unit's Voice Mail Waiting Indicator
(VMWI) feature, you must subscribe to this service from your phone
company.
The VMWI indicator on the top of the handset flashes when you receive a new
message from your service provider. Also, it serves as a Visual Ringer function. It will
flash when there is an incoming call.
Speakerphone Operation
NOTE: If you are using the speakerphone, remain close to handset
so the party you are speaking to can hear you.
If you are using the earpiece and want to switch to the speakerphone, press the
TALK/SPEAKER button, press END button to end conversation.
If you are using the speakerphone and want to switch to the earpiece, press the
TALK/SPEAKER button again, press END button again to end conversation.

Making a Call

Press the TALK/SPEAKER button. Dial the desired number.
1.
- OR -
Dial the number first, then press the TALK/SPEAKER button.
- OR -
Press the caller ID-volume (5 or 6) button to select the desired record, then
press the TALK/SPEAKER button.
When finished, press the END button to hang up.
.
NOTE: You may enter up to 28 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press
the delete/int/conf button until all of the digits are erased.