Edial - GE 27950 User Manual

. When finished, press the TALk/END button on handset or the
SPEAkER button on base, or put the handset back into the base
cradle to hang up.
NOTE: If you have turned the Auto Talk function on, you can
pick up the handset from the base to answer the incoming
call directly, without pressing any buttons.
NOTE: Adjust the handset volume by pressing the CID/VOL (
+ or - ) button during a call.
NOTE: If you press the SPEAkER button to answer a call
while the handset is not in the base cradle, the call will not
be ended even when you place the handset back into the
base cradle during the conversation.
Inserting a Pause in the Dialing Sequence
Press the #PAUSE button twice to insert a delay in dialing
sequence when a pause is needed to wait for a dial tone (for
example, after you dial 9 for an outside line, or to wait for a
computer access tone.) Pause shows in the display as a P, and
each pause counts as one digit in the dialing sequence.
Redial
To quickly redial a number you dialed:
1. Make sure the phone is OFF (not in talk mode).
. Press the TALk/END button.
. Press the REDIAL button first, then use the CID/VOL ( + or - )
button to select the desired redial number.
NOTE: You may choose from 10 last dialed numbers.
. Press the Talk/End button and the number will dial
automatically.
-OR-
1. Make sure the phone is OFF (not in talk mode).
7