P Rogramming The; Programming The Telephone - GE 27950 User Manual

. Begin speaking after you hear the beep.
. Release the ANNOUNCE button when you finish your
announcement.
NOTE: If you choose not to record an outgoing
announcement, a default announcement plays instead.
To return to the default announcement after you have
recorded your own outgoing announcement, press the
announce button and release it when you hear the beep.
Or, press the delete button while the announcement is
reviewing.
NOTE: The maximum duration allowed for outgoing
message is 2 minutes.

Programming the Telephone

Standby Screen
The handset displays the handset name, date, time, signal and
battery status.
NOTE: If the clock is not set, the date and time display will
blink. The blinking will stop when user updates the date/
time from the Handset menu, or the base receives a call
with CID having date and time stamp.
Programming Functions
The system uses a menu structure to give you access to all of the
built-in features. You may program the following items in main
menu: Intercom, Setup HS, Setup BS, Date/Time, Registration and
Answer system.
NOTE: If the handset is not registered, or is out of range,
Setup BS and Date/Time are not programmable, and
Unavailable displays as you try to enter these two menus.
17