Bluetooth Settings; Language Selection; Reset Setting - Canon MG5200 series Manual

Selects the format of date that is displayed on the LCD or printed on papers.
Read/write attribute
Selects whether to use the Card Slot of the machine as the memory card drive of a computer.
Quiet mode setting
Enables this function if you want to reduce the operating noise of the machine, such as when using
the machine at night (when copying, printing from the memory card, printing from the PictBridge
compliant device, printing with wireless communication, etc.).
Guide display settings
The guidance appears at the top of the operation screen or settings screen. You can change the
time interval before the guidance appears or hide it.
Key repeat
Enables to increase or decrease numbers rapidly by pressing and holding down the button when
inputting numbers. When this setting is disabled, holding down the button is the same as pressing
it once.
Mobile phone print settings
Specifies paper or image correction when you print from the wireless communication device. This
setting appears only when the optional Bluetooth Unit is connected to the machine.

Bluetooth settings

Changes the Bluetooth settings, such as the device name or passkey. This setting appears only
when the optional Bluetooth Unit is connected to the machine.
PictBridge print settings
Specifies paper, print quality, etc. when you print from the PictBridge compliant device.

Language selection

Changes the language for LCD messages and menus.

Reset setting

Sets the machine settings back to the default. (However, the settings configured in LAN settings, the
values set for the print head alignment, the setting in Read/write attribute, and the language set in
Language selection will not be reset.)
Page top