Changing The Adaptor's Ip Address; Changing The Adaptor's Password - Panasonic BL-PA300A Maintenance Manual

Changing the Adaptor's IP Address

You may change the adaptor's IP address and subnet
mask if necessary.
1.
Access the maintenance screen of the
corresponding adaptor (see page 5).
2.
Click [Option].
3.
Enter the desired IP address.
4.
Change the subnet mask if necessary.
5.
Click [Set], then click [OK] when prompted.
6.
Click [Restart].
• The adaptor will restart, and the new settings will
take effect. The new IP address must be entered in
the web browser's address bar in order to access
the adaptor's maintenance screen again.
Note
• After you have completed adaptor maintenance,
restore the computer's IP address and network
settings to their original values.
• We recommend changing the adaptor's IP address
and subnet mask to values that are compatible with
your network.
• When changing the adaptor's IP address, specify an
address that is not used by other devices on the
network.
• This screen is different for master and terminal
adaptors.

Changing the Adaptor's Password

You may change the adaptor's password if necessary.
The password is required to access the maintenance
screen.
1.
Access the maintenance screen of the
corresponding adaptor (see page 5).
2.
Click [Option], then click the [Account] tab.
3.
Enter the desired password, 6-12 characters (only
A-Z, a-z, and 0-9 can be used), then enter the
password again for confirmation.
• Passwords are case-sensitive.
4.
Click [Set], then click [OK] when prompted.
5.
Click [Restart].
• The adaptor will restart, and the new settings will
take effect. The new password must be entered in
order to access the adaptor's maintenance screen
again.
Note
• After you have completed adaptor maintenance,
restore the computer's IP address and network
settings to their original values.
• To increase security, we recommend changing the
adaptor's password.
• Do not forget the password. If the password is
forgotten, you can reset the password to the default
value (999999) by resetting the adaptor. If the
adaptor is reset, all registration information is erased.
• Do not disclose the password.
• The user name cannot be changed.
• This screen is different for master and terminal
adaptors.
Using the Maintenance Screen
7