Ce Marking - Vaillant ecoTEC plus 612 Instructions For Installation And Servicing

The Valliant ecoTEC are state-of-the-art appliances
which have been constructed in accordance with recog-
nised safety regulations. Nevertheless, danger to the life
and limb of the user or third parties can still occur or
the appliance or other material assets be impaired in the
event of improper use.
The appliance is designed to generate heat for connect-
ing to hot water central heating systems and for instan-
taneous hot water supply (ecoTEC 800 and pro only).
Any other use or extended use is considered to be use
other than intended. The manufacturer/supplier is not
liable for any resulting damage.
Intended use includes the observance of the operating
and installation manual and the adherence to the inspec-
tion and maintenance conditions.
Danger!
Any incorrect use is forbidden.
The appliances must be installed by a qualified engineer,
who is responsible for adhering to the existing regula-
tions, rules and guidelines.
1.4

CE marking

The CE marking shows that the appliances comply
with the basic requirements of the following direc-
tives:
- Gas appliances directive (90/396/EEC)
- Electromagnetic compatibility directive with threshold
class B (89/336/EEC)
- Low voltage directive (73/23/EEC)
The appliances satisfy the basic requirements of the effi-
ciency directive (92/42/EEC) as condensing appliance.
- The Gas Applaince (Safety) Regulations 1992
- The boiler (Efficiency) Regulations 1993
Vaillant Ltd. supports the Benchmark initiative.
In the information pack, you will find a
Benchmark Logbook. It is very important that
this is completed correctly at the time of
installation, commissioning and hand over to
the user.
Instructions for installation and servicing ecoTEC
Introduction 1
5