Notes On The Documentation 2; Observing Other Applicable Documents; Storing Documents; Validity Of The Instructions - Vaillant uniSTOR VIH SW GB 500 BES Installation And Maintenance Instructions Manual

2 Notes on the documentation
2.1

Observing other applicable documents

▶
Always observe all the operating and installation instruc-
tions included with the system components.
2.2

Storing documents

▶
Pass these instructions and all other applicable docu-
ments on to the end user.
2.3

Validity of the instructions

These instructions apply only to:
Product article number
VIH SW GB 500 BES 0010019234
2.4

Benchmark

Vaillant is a licensed member of the Benchmark Scheme.
Benchmark places responsibilities on both manufacturers
and installers. The purpose is to ensure that customers are
provided with the correct equipment for their needs, that it is
installed, commissioned and serviced in accordance with the
manufacturer's instructions by a competent person approved
at the time by the Health and Safety Executive and that it
meets the requirements of the appropriate Building Regu-
lations. The Benchmark Checklist can be used to demon-
strate compliance with Building Regulations and should be
provided to the customer for future reference.
Installers are required to carry out installation, commission-
ing and servicing work in accordance with the Benchmark
Code of Practice which is available from the Heating and
Hotwater Industry Council who manage and promote the
Scheme.
Benchmark is managed and promoted by the Heating and
Hotwater Industry Council.
For more information visit www.centralheating.co.uk
0020235301_03 uniSTOR Installation and maintenance instructions

Notes on the documentation 2

3

Product description

3.1

Serial number

1
You can find the serial number on the identification plate (1),
which is located on the cylinder below the electronics box.
3.2

Information on the identification plate

The identification plate is attached to the product at the fact-
ory.
The identification plate keeps record of the country in which
the product is to be installed.
This product meets the requirements of standard EN
12897:2006.
3.3

CE marking

The CE marking shows that the products comply with the
basic requirements of the applicable directives as stated on
the declaration of conformity.
The declaration of conformity can be viewed at the manufac-
turer's site.
5