Trailer Brake Controller-Integrated - Ford Expedition Owner's Manual

Safety Chains
Note: Do not attach safety chains to the bumper.
Always connect the trailer's safety chains to the frame or hook retainers
of your vehicle hitch.
To connect the trailer's safety chains, cross the chains under the trailer
tongue and allow enough slack for turning tight corners. Do not allow the
chains to drag on the ground.
Trailer Brakes
WARNING: Do not connect a trailer's hydraulic brake system
directly to your vehicle's brake system. Your vehicle may not have
enough braking power and your chances of having a collision greatly
increase.
Electric brakes and manual, automatic or surge-type trailer brakes are
safe if you install them properly and adjust them to the manufacturer's
specifications. The trailer brakes must meet local and federal regulations.
The rating for the tow vehicle's braking system operation is at
the gross vehicle weight rating, not the gross combined weight
rating.
Separate functioning brake systems are required for safe control
of towed vehicles and trailers weighing more than 1500 pounds
(680 kilograms) when loaded.
Integrated Trailer Brake Controller (If Equipped)
WARNING: The Ford TBC has been verified to be compatible
with trailers having electric-actuated drum brakes (one to four
axles) and some electric-over-hydraulic (EOH) brakes. It will not
activate hydraulic surge-style trailer brakes. It is the responsibility of
the customer to ensure that the trailer brakes are adjusted
appropriately, functioning normally and all electric connections are
properly made. Failure to do so may result in loss of vehicle control,
crash or serious injury.
When used properly, the trailer brake controller assists in smooth and
effective trailer braking by powering the trailer's electric or
electric-over-hydraulic brakes with a proportional output based on the
towing vehicle's brake pressure.
2013 Expedition (exd)
Owners Guide gf, 3rd Printing, April 2013
USA (fus)
Towing 263