Remote Control - Sanyo DTA-300M Instruction Manual

Controls
1
17
16
15
14
13
REMOTE CONTROLLER RB - DTA300M
1. Power button (z/ON)
2. Clock/Timer button (CLOCK/TIMER)
3. Sleep button (SLEEP)
4. Snooze button (SNOOZE)
5. Volume buttons (- VOLUME +)
6. Open/Close button for CD Compartment door
(OPEN/CLOSE)
7. Memory button (MEMORY)
8. Stop button (n)
9. Play/Pause button (i)
10. Repeat/FM mode button (REPEAT/FM MODE)
11. Sound preset button (SOUND PRESET)
12. Bass expander button (BASS)
13. Number buttons (1-9, 0, +10)
14. Skip/Search/Tuning buttons (f/TUNE -, e/TUNE +)
15. MP3 skip back/MP3 skip forward/Preset tuning buttons
(-10 SKIP/- PRESET, SKIP +10/PRESET +)
16. Tuner function/Band select button (TUNER/BAND)
17. Function button (FUNCTION)
Number buttons (1-9, 0, +10)
These buttons are used to select the track numbers on a disc or preset
radio stations.
If the function is "CD'', the buttons select the track numbers on a disc.
If the function is "TUNER", the buttons select preset radio stations.
Example:
To select No. 3, press 3.
To select No. 10, press +10, then 1 and 0.
To select No. 25, press +10, then 2 and 5.
When you use the remote control for the first time ...
Pull the plastic sheet. The remote control can be used from now.
Note:
There is CR2025 Lithium Battery (supplied) in the battery compartment
of the remote control.

REMOTE CONTROL

2
3 4
5
6
7
8
9
10
11
12
Replacing the battery
1.
2
1
Notes:
- When the remote control does not work properly, the battery is weak
Replace it.
- Remove the battery if the remote control is not be used for a month
or more. Battery left in the unit may leak and cause damage.
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
Remote control range
Remote sensor
The buttons on the remote control perform similar functions to similarly
marked buttons on the front panel.
-3-
2.
Please purchase CR2025.
Lithium Battery.
Within approx. 7 meters
REMOTE CONTROLLER RB - DTA300M