Table of Contents
Advertisement
5 FRONT RIGGINGS
5 Front Riggings
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
5.1
Installing/Removing the Swingaway Footrest Assembly
Installing
1.
Turn the swingaway footrest assembly to the side (so that the
footplate is perpendicular to the wheelchair).
2.
Install the hinge plates on the swingaway footrest assembly onto the
hinge pins on the wheelchair frame.
3.
Push the swingaway footrest assembly towards the inside of the
wheelchair until it locks into place.
4.
Repeat this procedure for the other footrest assembly.
The footplates will be facing each other when locked in
place.
Removing
1.
Push the footrest release lever toward rear of chair.
2.
Rotate swingaway footrest assembly outward.
3.
Lift the swingaway footrest assembly off of the hinge pins.
Invacare® Jymni™ Pediatric Series Wheelchair
Hinge Pins
FIGURE 1 Installing/Removing the Swingaway Footrest Assembly
34
Footrest Release Lever
Hinge Plates
Part No 1100868
Advertisement
Table of Contents
Troubleshooting
