Kenwood NEXEDGE NX-410 Instruction Manual page 18

e Side 1 key
Press to activate its programmable function {page 7}. The
default is Squelch Off Momentary.
f PTT (Push-To-Talk) switch
Press and hold this switch, then speak into the microphone
to call a station.
g Side 2 key
Press to activate its programmable function {page 7}. The
default is Backlight.
h key
Press to activate its programmable function {page 7}. The
default is Zone Up.
i key
Press to activate its programmable function {page 7}. The
default is Menu.
j key
Press to activate its programmable function {page 7}.
k key
Press to activate its programmable function {page 7}.
l key
Press to activate its programmable function {page 7}.
m key
Press to activate its programmable function {page 7}. The
default is Zone Down.
n Keypad
Press these keys to send DTMF tones. These keys can
also be programmed with secondary functions {page 7} if a
programmable function key is programmed as "Function".
o Universal connector
Connect a speaker/ microphone or headset here {page 3}.
Otherwise, keep the supplied cap in place.
5