PROBLEM
TO REMOVE WRINKLES
ON DRYERS WITH A
PERMANENT PRESS
SETTING
If you need more help...call, toll free:
®
GE Answer Center
800.626.2000
consumer information service
POSSIBLE CAUSE
TO REMOVE WRINKLES:
• Retumble on Perm. Press/Reg setting.
• Rerinse and dry on Perm. Press/Reg setting.
• If unsuccessful, retumble on normal temperature for 10–12 minutes
and hang immediately.
• Iron carefully.
• Send to Dry Cleaners for pressing.
• Some wrinkles may remain which cannot be removed.*
* NOTE: If you follow good laundry procedures and permanent press
clothes still come out wrinkled, the finish may not be good quality. Also, in
permanent press synthetic/cotton blends, the cotton portion of the fabric can
eventually wear away leaving only the synthetic. Since its the cotton portion
which is treated for permanent press, a loss or decrease of permanent press
performance will result.
13
Need help?
Do you have a question about the Spacemaker DSKP233ET and is the answer not in the manual?