Download Print this page
GE Spacemaker DSKP333EC Dimensions And Installation Information

GE Spacemaker DSKP333EC Dimensions And Installation Information

Portable dryer

Advertisement

DSKP333EC
GE Spacemaker
Portable Dryer
®
Dimensions and Installation Information (in inches)
Dryer Note:
Dryer wall outlet must be locted within 36" of service cord entry and accessible
when dryer is mounted in position.
Special Installation Requirements
Alcove or Closet Installation:
• If your dryer is approved for installation in an alcove or closet, it will be stated on
a label on the dryer back.
• The dryer MUST be exhausted to the outside.
• Minimum clearances between dryer cabinet and adjacent walls or other
surfaces are:
0" either side
3" front and rear
• Minimum vertical space from floor to overhead cabinets, ceilings, etc. is 52".
• Closet doors must be louvered or otherwise ventilated and must contain a
minimum of 60 sq. in. of open area equally distributed. If this closet contains
both a washer and a dryer, doors must contain a minimum of 120 sq. in. of open
area equally distributed.
• No other fuel-burning appliance shall be installed in the same closet with
a gas dryer.
Bathroom or Bedroom Installation:
• The dryer MUST be exhausted to the outdoors.
• The installation must conform with the local codes, or in the absence of local
codes, with the National Fuel Gas Code, ANSI Z223.
Minimum Clearances other than Alcove or Closet Installation:
• Minimum clearances to combustible surfaces
0" both sides
3" rear
For answers to your Monogram,
GE Profile
®
GE
appliance questions, visit our website at
®
ge.com or call GE Answer Center
®
800.626.2000.
or
service,
PUSH TO START
24-1/2
DSKP333ECWW
OFF
140
F L U F F CYC L E
10
NO HEAT
120
20
30
100
OFF
80
cool down
OPTIMUM
AU TO M AT I C CYC L E
60
REGULAR HEAT
50
EXTRA
DRY
40
T I M E D CYC L E
OFF
10
20
30
cool
HIGH HEAT
down
*
PREFERRED SETTING
33-1/4
23-7/8
Specification Revised 9/07
Listed by
Underwriters
Laboratories
360430

Advertisement

loading

Summary of Contents for GE Spacemaker DSKP333EC

  • Page 1 • Minimum clearances to combustible surfaces 0" both sides 3" rear For answers to your Monogram, GE Profile ® ™ appliance questions, visit our website at ® ge.com or call GE Answer Center ® service, 800.626.2000. PUSH TO START 24-1/2 23-7/8 DSKP333ECWW Specification Revised 9/07...
  • Page 2 For answers to your Monogram, GE Profile ® ™ appliance questions, visit our website at ® ge.com or call GE Answer Center ® service, 800.626.2000. For complete information, see installation instructions packed with your dryer. Ducting Materials: For best performance, this dryer should be vented with 4" diameter all rigid metal exhaust duct.
  • Page 3 • Model DSKP333ECWW – White on white For answers to your Monogram, GE Profile ® ™ appliance questions, visit our website at ® ge.com or call GE Answer Center ® service, 800.626.2000. F L U F F CYC L E NO HEAT cool down...

This manual is also suitable for:

Spacemaker dskp333ecww