Grundig GDP 3560 User Manual page 18

Installation Picture Sound
TV Format 4:3 LB
TV Standard PAL
HDMI Resolution 576p
Video Output RGB
HD JPEG Mode HD JPEG
JPEG Interval 5 Seconds
18
GETTING STARTED
Selecting the video output socket
(EURO AV/RGB or S-Video)
The video output of your DVD player has been set at the factory to
»RGB«.
When you connect your DVD-Player to the television, flat screen or
projector using a Y/C cable
player) or using a cinch cable (»Y«, »Pb/Cb« and »Pr/Cr«
sockets on the DVD player), you will need to set the video output for
the video signal and the image to be relayed to the television.
Notes:
If you cannot see the settings menu, connect the
OUT« socket on the DVD player to the corresponding socket
(VIDEO IN) on the television using a cinch cable.
Call up the main menu with »i«.
1
Child Lock
Select the »Picture« menu item with »
2
with »OK«.
Select »Video output« with »
3
S-Video
»OK«.
YUV
RGB
4 Select the desired video output with »
YPbPr
firm with »OK«.
– »S-Video« for the
»YUV« for the
»RGB« for the
»YPbPr« for the »Y«, »Pb/Cb« and »Pr/Cr« sockets.
5 Press »i« to conclude the setting.
Notes:
If the television has been connected to the
socket, no picture will appear. Keep pressing »x« until the
picture appears.
The video output is set to »S-Video«.
_______________________________
(»S-VIDEO OUT« socket on the DVD
a
S
« or »
S
»S-VIDEO OUT« socket;
»EURO AV TV« socket;
»EURO AV TV« socket;
»VIDEO
s
« or » « and activate
A
« and activate with
A
« or » « and con-
»S-VIDEO
OUT«