Connecting An Audio System With Analogue Two-Channel Stereo Sound; Connecting The Power Cord; Inserting Batteries In The Remote Control - Grundig GDP 3560 User Manual

Y Pb/Cb
VIDEO OUT
S VIDEO OUT
HDMI OUT R AUDIO OUT L DIGITAL AUDIO OUT
100-240 V~
50/60 Hz 15 W
16
CONNECTION AND PREPARATION
Connecting an audio system with analogue two-
channel stereo sound
R L
AUDIO
INPUT
1
Pr/Cr
EURO AV

Connecting the power cord

1
2

Inserting batteries in the remote control

1
2
3
Y Pb/Cb Pr/Cr
VIDEO OUT
S VIDEO OUT
HDMI OUT R AUDIO OUT L DIGITAL AUDIO OUT
Plug a standard cinch cable into the
socket of the DVD player and into the corresponding socket on
the audio system.
Caution:
Do not connect the »R AUDIO OUT
player to the PHONO (record player) input socket on the audio
system.
Plug the mains cable supplied into the
on the back of the DVD player.
Plug the mains cable into the wall socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices.
Open the battery compartment by pressing the snap-catch, and
remove the lid.
When inserting the batteries (Micro type, e.g. R06 or AA,
2 x 1.5 V), observe the polarity marked on the battery compart-
ment.
Close the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control
commands, the batteries may be flat. Be sure to remove used
batteries. The manufacturer accepts no liability for damage
resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, may
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
EURO AV TV
»R AUDIO OUT
L« socket on the DVD
»100-240
_
100-240 V~
50/60 Hz 15 W
L«
V~« socket