Connecting Analog Terminals - Sagem F@st 800 (RFC 1483) User Manual

2.1.1

Connecting analog terminals

Splitters are required when using the SAGEM F@st™ 800 and analog terminals on the same
telephone line.
There are two types of configuration that use different splitters.
In most cases, your Operator will provide you with the information you need to choose between
the two options.
Configuration with input splitter
Your Operator will tell you how many analog terminals can be connected.
Configuration with distributed splitters (microfilters)
The configuration with microfilters requires one microfilter for each analog terminal.
Your Operator will tell you how many analog terminals can be connected.
Reproduction and communication prohibited without the written permission of E
MEDIUM
SPLITTER
ADSL Line
Analog Signals
ADSL Line
Microfilter
Analog
Signal
TELEPHONE
SAGEM F@st™ 800 (RFC 1483) User Guide - 288021413-03
2 - Connecting the SAGEM F@st
Analog + ADSL
Signals
TELEPHONE
Microfilter Microfilter
Analog
Signal
TELEPHONE
FAX
SAGEM F@st TM 800
FAX
SAGEM F@st TM 800
Analog
Signal
E E E
Page 2-3
800
TM