Using Amplifier
Before starting using the amplifier, please connect all the audio devices to the
device first. Refer to the included Amplifier Connection Diagram.
Equalizer Setting
Press the NORMAL, CLASSIC, JAZZ,
ROCK, POP or DANCE buttons to
select the Equalizer setting you like for
listening.
Note: The factory default setting is
NORMAL.
Mute
1. Press the MUTE button in POWER
ON mode.
2. The Mute LED on the front panel of
the amplifier will be lit. The sound is
turned off.
3. To restore the sound, press any
button on the amplifier or on the
remote control.
Night Mode
1. Press the
control.
2. The Mute LED on the front panel of
the amplifier will flash.
3. The amplifier will automatically lower
and balance any sudden burst of
loudness from the input souce before
outputting it.
4. To cancel the function, press the
button again.
Note: This function is used when the
amplifier is playing at night to prevent
any unexpected loudness.
4
button on the remote