Basic Operation; Volume Adjustment - Goodmans GHC 56 PRO User Manual

Using Amplifier
Before starting using the amplifier, please connect all the audio devices to the
device first. Refer to the included Amplifier Connection Diagram.

Basic Operation

1. Press the POWER button on the
main unit, the amplifier goes to
STANDBY mode.
2. Press any button on the main unit or
on the remote control, the amplifier
goes to POWER ON mode.
3. Press the POWER button again to
turn off the amplifier, or press on the
STANDBY button on the remote
control to put the device in standby
mode.
Input Source Selection
1. Press the SOURCE button on the
amplifier repeatedly to select an input
source, or
2. Press the individual Coaxial DVD,
Tuner, Game, TV/VCR or AUX
buttons on the remote control to
select the audio input source directly.
3. The corresponding indicator will light.
(see the amplifier front panel)
Test Tone Checking
1. Press the TEST TONE button when
the amplifier is in POWER ON
mode.
2. The amplifier will output a test tone
to the 6 spearkers in turn.
3. While the test tone is playing use
the individual speaker volume
buttons to adjust the volume from
each speaker.
Note: To stop the test tone, press the
test tone button again.

Volume Adjustment

1. Press the VOLUME UP/DOWN
buttons to raise/lower all speaker's
volume, or
2. Press the Front Left Up/Down
Volume button, Front Right Up/
Down Volume button, Center Up/
Down Volume button, Rear Left
Up/Down Volume button, Rear
Right Up/Down Volume button and
Subwoofer Up/Down Volume
button to adjust the individual
speaker's volume level.
3