2.2 Side View 2.3 Rear View Operation 3.1 LED indicator 3.2 Remote control Quick Setup 4.1 Connect Aspect to your TV 4.2 Power on Aspect 4.3 Choose the source type 4.4 Mute your TV output Features HORIZONTAL/VERTICAL SOUND MODES Switch between horizontal and vertical modes BLUETOOTH CONNECTIVITY 4.2 Set the source type to bluetooth...
• Quick Start Guide • Guarantee Booklet If any of these items are missing contact customer support. Visit: www.goodmans.co.uk/support. Mains Power Your Aspect Soundbar requires a mains supply of 90-265V 50~60Hz. Please ensure that your mains supply is compatible before use. ASPECT...
Press to change the input source. The indicator shows the status or source type by different colours. Rear View DC power input Used to connect Aspect to the mains power supply. Optical digital input Connect to television’s opitical digital output.
Operation LED Indicator The LED indicator on the side of Aspect helps you to identify the status and source mode. Red: power off White: optical input Yellow: coaxial input Green: aux input Magenta: line input Blue: bluetooth input Remote Control Mute Short press: mute or unmute the sound.
Quick Setup Connect Aspect to your TV Aspect offers four types of audio connectivity for you to choose. Only one source type is needed for connection. 1. Plug an audio cable into an available connection on your TV. 2. Plug the other end of the chosen cable to the corresponding audio input connector of Aspect.
Choose the source type Aspect offers four types of audio connectivity for you to choose. Only one source type is needed for connection. 1. Use the remote control, or press the LED on the side of Aspect to change the source type.
3 times when in horizontal mode. BLUETOOTH CONNECTIVITY Set the source type to bluetooth Use the remote control, or press the source button on the right hand of Aspect, to set bluetooth mode. The LED indicator will show blue. ASPECT...
1. Go to the bluetooth setting on your smartphone, tablet, computer or other devices. 2. Search and select ‘Aspect’ to connect. If your phone is NFC compatible, touch the NFC zone, the middle on the front of Aspect, with your phone to pair.
Set the source type to Aux in 1. Use the remote control, or press the source button on the right hand of Aspect, to set Aux in mode. The LED indicator will show green. 2. Press play on the external device to begin playback through Aspect.
Problem What to do 1. Make sure Aspect is powered on. 2. Check the volume control of Aspect is not at a minimum. 3. Check Aspect is not set to mute. 4. Make sure Aspect is set to the correct source that There is no sound from my Aspect corresponds to the connected input source.
Page 12
Speaker Output Power 15W x 2 Frequency Range 130Hz-15KHz Max Power Consumption Dimensions 600mm (W) x 320mm (D) x 100mm (H) Customer Support Our customer service team is available for technical or guarantee support, www.goodmans.co.uk/support. 2.0 CHANNEL DUAL ORIENTATION SOUNDBAR www.goodmans.co.uk ASPECT...
Need help?
Do you have a question about the ASPECT and is the answer not in the manual?
Questions and answers