Normal Operating Sounds; Instructions; Operating - Frigidaire 900 Series Use & Care Manual

Frigidaire gallery
Hide thumbs Also See for 900 Series:
Table of Contents

Advertisement

Operating Instructions
Vent
Very Important
Information—
Operating Your Dishwasher!
Normal Operating
Sounds
This dishwasher does not sound like most
dishwashers—IT'S QUIETER.
The new Precision Wash System™ uses
energy efficient motors for the wash and
drain portions of the cycle you select. Each
cycle has a series of water fills and drains
for washing and rinsing dishes. As each
cycle begins, you may–or may not–hear the
drain motor.
The next sound you will hear is the
splashing water as it enters the tub. Then the
lower arm rotates and circulates water. This
is followed by a pause and a slightly different
sound as the middle arm sprays water. If you
listen closely, you will hear the change in
sound as the wash action switches from one
arm to the other.
PLEASE BE ADVISED: If you compare
this dishwasher to previous models, you
may be surprised at what you DON'T
hear!
Read Before
Latch
Appearance may vary from your model.
Getting Started
1. Load dishwasher (See Preparing and Loading
Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Close door to latch.
5. Select desired CYCLE (See Cycle Chart). The
indicator light above the pad will glow when
selected.
6. Select desired OPTIONS (See Energy
Options). The indicator light above the pad will
glow when selected.
7. If using DELAY START, go to step number 9.
8. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
9. To start, press START/CANCEL pad.
Wash Cycle Selections
Note: Cycle times are approximate and will
vary with options selected. Hot water is
necessary to activate dishwasher detergent
and melt fatty food soils. An automatic sensor
will check the incoming water temperature
and, if it is not hot enough, the timer will be
delayed for automatic water heating in the
main wash of all cycles. This happens even
when HI-TEMP WASH option has not been
selected. When HI-TEMP WASH is selected,
an even higher temperature will be guaranteed
to handle heavier soil loads.
4

Advertisement

Table of Contents
loading

Table of Contents