GE 234D1157P003 Owner's Manual page 6

About the control settings.
A
End of Cycle Signal
This signal will sound just before the end of the cycle to remind you to remove the clothes.
If you select the EXTEnDED TuMblE option, the signal will sound at the end of the drying time and will sound
several times during the EXTEnDED TuMblE cycle. This will remind you that it is time to remove the clothes.
nOTE:
• Remove garments promptly at the sound of signal. Place clothes on hangers so wrinkles won't set in.
• Use the EnD Of CyClE SIGnAl especially when drying fabrics like polyester knits and permanent press.
These fabrics should be removed so wrinkles won't set in.
Extended Tumble
Use this option to minimize the wrinkles in clothes. It provides approximately 1 hour of no-heat tumbling after
the clothes are dry.
If you are using CyClE SIGnAl and you select the EXTEnDED TuMblE option, a signal will sound at the end
of the drying time and several times during the EXTEnDED TuMblE cycle. This will remind you that it is time
to remove the clothes.
b
Temperature
HIGH
MEDIUM
LOW
EXTRA LOW
NO HEAT
C
Dryness—
Selection only used for SEnSOR cycles. Timed Cycles run for the selected time at the selected temperatures.
MORE DRY
DRY
LESS DRY
DAMP
D
Estimated Time Remaining Display
• Displays the approximate time remaining until the end of the cycle.
• If the estimated time remaining is 60 minutes or more, "1H" will flash in the display, followed by the additional
remaining minutes. When the time remaining is less than 60 minutes, the timer will count down.
6
For regular to heavy cottons.
nOTE: STEAM DEWRInklE and STEAM REfRESh require the High temperature setting.
For synthetics, blends, delicates and items labeled permanent press.
For delicates, synthetics and items labeled tumble dry low.
For delicates, synthetics and items labeled tumble dry low.
For fluffing items without heat. For use only with the TIMED DRy cycles.
Use for heavy-duty fabrics.
Use for a normal dryness level suitable for most loads. This is the preferred cycle for energy savings.
Use for lighter fabrics.
For leaving items partially damp.
Message Displayed Description
The message "PAUSE" will scroll across the display
when the dryer's cycle is paused. The cycle may be
restarted by pressing the START button.
The message "door" will be displayed when the door
is opened during the dryer's cycle.
The message "HEAt" will be displayed when the start
button is pressed for a steam refresh or de-wrinkle
cycle. Turn the temperature knob to "High" and press
the start button.