To Install Your 3Dlabs Windows Nt Driver; To Install Your 3Dlabs Windows 2000 Driver; To Install The 3Dlabs Windows 98 Driver - 3Dlabs Oxygen GVX1 Pro User Manual

Your product CD includes 3Dlabs PowerThreads driver software, which lets you set
image quality and performance preferences for your card. It also includes the Soft
Engine AutoCAD accelerator and productivity tool package, and Colorific screen-to-
print color matching software. Installing Soft Engine on your AutoCAD equipped
system will improve graphics performance by up to four times, however it will only
improve performance with AutoCAD R14 or earlier versions. In addition, it will not
work with AutoCAD 2000. Colorific painlessly ensures that what you see is what you
print. This section describes the two software installation processes for supported
Windows operating systems.

To install your 3Dlabs Windows NT driver

1. Start up Windows NT. Log onto an account with administrator privileges.
2. Place the 3Dlabs Product CD in your CD-ROM drive. When the installation
window opens, choose the 3Dlabs Windows NT driver installation.
3. Follow the instructions that appear on your screen. (Be sure to read the
software license agreement.)
4. Restart your system at the prompt.

To install your 3Dlabs Windows 2000 driver

1. After installing your 3Dlabs Graphics Accelerator Card, start up Windows 2000.
The Hardware Wizard appears.
2. Click Cancel in all dialog boxes that appear regarding "Found New Hardware."
3. Place the 3Dlabs Product CD in your CD-ROM drive.
4. Select the Windows 2000 drivers directory and run setup.exe. The 3Dlabs
Graphics Driver Setup program begins and guides you through the driver
installation process.
5. When the "Digital Signature Not Found" Box appears, click "yes". This step may
be repeated up to three times. Continue clicking "yes" until the "Restart" dialog
appears, then click "Finish" to reboot.

To install the 3Dlabs Windows 98 driver

1. After installing your 3Dlabs Graphics Accelerator Card, restart your system.
Windows 98 automatically detects the new hardware and starts the New
Hardware Wizard.
2. In the Add New Hardware Wizard, click Next.
3. Place the 3Dlabs Product CD in your CD-ROM drive.
4. Confirm that Specify a Location is selected, and then type x:\Win98
(where "x" is the letter of your CD drive).
5. Follow the instructions that appear on your screen. (Be sure to read the
software license agreement.) Restart your system at the prompt.
3Dlabs Graphics Accelerator Card User's Manual
Installation
7