Connecting One Or More Vga Or Digital Flat Panel (Dfp) Monitors - 3Dlabs Oxygen GVX1 Pro User Manual

8. Place the card into the correct slots(s) and seat it/them firmly. See your system
documentation for instructions on securing the card to the chassis. Loose cards
and connections can cause grounding and operating problems.
Single slot card
9. Remove the anti-static wrist strap, if used, and replace the cover on your
system.

Connecting one or more VGA or Digital Flat Panel (DFP) monitors

1. Depending on which model of 3Dlabs Graphics Accelerator Card you
pruchased, you can connect one or two VGA or digital Flat Panel (DFP) monitors
to drive one or two displays.
2. Check your product's packaging or the datasheet on the 3Dlabs website to
determine how many and which type of connectors are included. See the
drawings below for the different type of connectors.
3Dlabs Graphics Accelerator Card User's Manual
Installation
DB-15 VGA Analog Connector
Connect analog displays using a cable
with a VGA connector.
DVI-D Connector
Connect digital displays using a cable
with a DVI-D connector.
DVI-I Connector
Connect digital or analog displays
using a cable with a DVI-D or DVI-I
connector.
MDR-20 Connector
Connect digital displays using a cable
with an MDR-20 connector.
Dual slot card
5