Copying Setup Information From Another Harmony Remote; Adding Devices - Logitech Remote Controller User Manual

Copying setup information from another Harmony remote

If you have a previous Harmony remote such as Harmony One, Harmony 1100 or Harmony 880, you can reuse the
device and Activity settings from that remote to program your Harmony Ultimate. If you do not have a previous
Harmony remote, skip to the Adding Devices section below.
To copy a previous Harmony remote's settings, click the Copy button shown below. You will be asked to enter the
ID and password for your previous account. When you do, the settings will be copied and applied to your Harmony
Ultimate account.
Once your settings are copied, you will be able to add more devices or Activities and modify your settings.

Adding Devices

To add devices during setup, enter the manufacturer and model number when prompted:
Carefully enter the manufacturer or brand of your first device followed by the model number. Harmony will
automatically correct for common errors such as zeros or ones being confused for the letters '0' or 'I' and will
provide suggestions if the entered device cannot be found.
Serial numbers found on your devices should not be entered as they are unique and cannot be used to identify the
device you have. It is important to enter manufacturer and model information correctly because not doing so may
cause devices to change to the wrong input, miss commands, or not function at all during Activities.
Logitech Harmony Ultimate
17