Setting Up Devices To Control; Copying Setup Information From Another Harmony Remote; Adding Devices - Logitech Harmony Touch User Manual

For more support options, refer to the

Setting up Devices to control

The first step to setting up Harmony Touch is to tell MyHarmony what devices you have in your entertainment
system.
When you have your device information collected (as described in the
Next.

Copying setup information from another Harmony remote

If you have a previous Harmony remote such as Harmony One, Harmony 1100 or Harmony 880, you can reuse the
device and Activity settings from that remote to program your Harmony Touch. If you do not have a previous
Harmony remote, skip to the Adding Devices section below.
To copy a previous Harmony remote's settings, click the Copy button shown below. You will be asked to enter the
ID and password for your previous account. When you do, the settings will be copied and applied to your Harmony
Touch account.
Once your settings are copied, you will be able to add more devices or Activities and modify your settings.

Adding Devices

To add devices during setup, enter the manufacturer and model number when prompted:
Logitech Harmony Touch
Support section of this manual.
14
Devices section) and are ready to begin, click