Advertisement
CD documentation
There is documentation on the CD that combines elements of this installation guide with further
technical details and any late-breaking information, plus a complete step-by-step technical
support guide.
To read it, you can browse to the following folder on the CD and, after you have installed
SonicFury, you can also run the CD to start the SonicFury Home Page, and select the
Documentation menu option.
•
Windows 95 or 98
•
Windows NT 4.0
•
Windows 2000
•
Windows Me
Minimum system requirements
To use SonicFury you need a Pentium 200 MMX PC or equivalent with 32 MB RAM, running
Windows 95, 98, NT 4.0, 2000 or Me which has a spare PCI 2.1 compliant expansion slot.
You also need headphones or powered loudspeakers.
Handling the card
Follow these guidelines to minimize the risk of electrostatic charges damaging the card:
•
Keep the card in its protective packaging until you are ready to install it.
•
Just before handling the card, touch the metal frame of your PC with the back of your hand
to discharge any static electricity which may have built up on you or your clothes.
•
Hold the card by the adapter bracket or by its edges; do not touch the circuit board.
•
Do not place the card on top of your computer or on any other metal surface.
•
Make sure that the card is not accidentally touched by anyone else.
•
Handle the card with care to avoid damage to the components on the circuit board.
SonicFury Installation Guide
\Readme\Win9x\Read_Me.htm
\Readme\WinNT\Read_Me.htm
\Readme\Win2K\Read_Me.htm
\Readme\WinME\Read_Me.htm
- 3 -
Advertisement
