Advertisement
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio and television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
the receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult an authorized VideoLogic dealer or service
representative for help.
Properly shielded and grounded cables and connectors
must be used in order to meet FCC emission limits. Proper
cables and connectors are available from authorized
dealers. VideoLogic is not responsible for any radio or
television interference caused by using other than
recommended cables and connectors or by unauthorized
changes or modifications to this equipment. Unauthorized
changes or modifications could void the user's authority
to operate the equipment.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
ELECTROMAGNETIC COMPATIBILITY (EUROPE)
This equipment complies with the European new approach
directive on EMC (Directive 89/336/EEC). Please contact
us for further details.
PRODUCT SERVICE
All VideoLogic products carry a 12 month warranty. If you
have a problem with a VideoLogic product, contact your
Reseller or place of purchase first. Authorized VideoLogic
Resellers will be able to identify faults for you. Products
returned under warranty with relevant proof of purchase
are serviced or replaced free of charge.
LIMITED WARRANTY
VideoLogic warrants the Product to be in good working
order for a period of five (5) years from the date of
purchase (the "Warranty Period"), as indicated on the
sales receipt. Should the product not be in good working
order VideoLogic will, at its option, repair or replace the
Product free of charge. This Warranty does not cover
damage that occurs as a result of negligence in shipment
or that results from alteration, accident, misuse or neglect.
Repair parts and replacement Products will be furnished
on an exchange basis and will either be new, equivalent to
new or reconditioned. All replaced parts and Products will
become the property of VideoLogic.
Warranty service may be obtained by delivering or shipping
the Product, postage prepaid, prior to the expiration of the
Warranty Period to a VideoLogic Authorized Reseller for
the Product, together with proof of purchase and a
description of the problem. VideoLogic requests (but
does not require) that you complete and return the Warranty
Registration Card enclosed, in order to verify warranty
status in the event of a dispute.
THIS IS A LIMITED WARRANTY
,
WARRANTIES
EXPRESS OR IMPLIED
LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE
VIDEOLOGIC BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY
.
OF SUCH DAMAGES
;
VIDEOLOGIC MAKES NO OTHER
,
INCLUDING BUT NOT
.
IN NO EVENT WILL
Advertisement
