Panasonic Panafax UF-4000 Operating Instructions Manual page 85

Individual Transmission Journal (IND. XMT JOURNAL)
Explanation of Contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication result
(5) Number of pages transmitted or
received
(6) File number
(7) Duration of communication
(8) Type of communication
(9) Remote station identification
(10) Communication date
(11) Communication start time
(12) Diagnostic
(13) Own LOGO
(14) Own ID number
(15) Own Character ID
(16) Type of communication
(17) Destination
(18) Received remote station's ID
(19) Resolution
: "OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy
line.
"STOP" indicates that STOP was pressed during communication.
"M-OK" indicates that the substitute reception message in memory was
not printed.
"P-OK" indicates that memory overflow or document misfeeding occurred
while storing the documents into memory for transmission but
successfully stored document(s) was sent.
"3-digit Info Code" (see page 98) indicates that the communication has
failed.
: The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into memory, two 3-digit numbers will
appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of
pages that were attempted to be transmitted.
Asterisk "*" indicates that the quality of some received copies was poor.
: 001 to 999 (If the communication is stored into memory, a file number is
assigned for each communication.)
: "XMT" means Transmission
"RCV" means Reception
"POL" means Polling
"FWD" means Fax Forward
"RMT" means Remote Diagnostic/Firmware Update
: Name : Recorded name in One-Touch or ABBR. Numbers or remote
station's Character ID.
$ number : Dialed telephone number (PIN Code will not be shown)
Number : Remote station's ID number.
: For service personnel only
: Up to 25 characters
: Up to 20 digits
: Up to 16 characters
: Transmission or memory transmission
: If a One-Touch or ABBR was used for the transmission:
One-Touch or ABBR. No./Telephone Number/Recorded Name
If not : Telephone number
: Character ID or ID number
: "STD" means Standard resolution
"FINE" means Fine resolution
"S-FINE" means Super Fine resolution
Journals and Lists
85