Malfunction, Causes And Solutions - Zibro Clima D12 Operating Manual

I

MALFUNCTION, CAUSES AND SOLUTIONS

Check the following before requesting technical assistance:
MALFUNCTION
The machine does
not operate.
The machine does
not reduce
humidity.
The dehumdifier
operates, but does
not reduce
humidity.
The manufacturer reserves the right to alter this information without prior notice.
CAUSES
The plug is not in the
socket.
The control button is at
the lowest setting.
The reservoir is full.
The reservoir has not been
installed properly.
The air filter is dirty.
The temperature or
humidity in the room
where the dehumidifier
has been placed is too
low.
The room is too big.
There are too many
sources of humidity.
SOLUTIONS
Put the plug in the socket.
Turn the control button to
the desired setting.
Drain the water from the
reservoir.
Install the reservoir correctly.
Clean the air filter.
It is normal that the
dehumidifier does not
reduce humidity under
exceptional conditions (see
Technical specifications).
We recommend that you
place more dehumidifiers.
We recommend that you
place more dehumidifiers.
4
31