GET TO KNOW THE
PrESSUrE WASEr
Compare the illustrations with your unit
to familiarize yourself with the location
of various controls and adjustments.
Save this manual for future reference.
F
C
E
Q
L
M
k
J
h
I
A.
Quick Connect Nozzles
B. Nozzle Holder
C. Handle
D. High Pressure Hose: Carries the
pressurized water from the pump
to the gun and spray wand.
E.
Pump Outlet
F.
Pump Inlet
G. High Pressure Pump: Increases
the pressure of the water supply.
H. Engine ON/OFF Switch: Enables
and disables ignition system.
I.
Engine: Drives the high pressure
pump. Refer to the engine manual
for location and operation of engine
controls.
J.
Frame
K.
Starter Grip: Pulling starter grip
operates recoil starter to crank
engine
L.
Choke Control: Opens and closes
carburetor choke valve.
M. Fuel Valve Lever: Opens/closes
connection between fuel tank and
carburetor.
N. QuickConnect
O. Spray Gun: Connects with spray
P.
A
B
O
Q. Gas fill
D
A.
B. Nozzle Holder
C. Handle
D. High Pressure Hose
I/J. Engine Frame and Wheel
N
N. Quick Connect Spray Wand
G
O. Spray Gun
P.
R. Operation Manual
S.
T.
U. Bagged Parts
U
8- ENG
Spray
Allows the user to quickly change
out high-pressure nozzles. Refer to
Spray Wand Nozzles.
wand to control water flow rate,
direction, and pressure.
Chemical Hose (not shown): Feeds
cleaning agents into the pump to
mix with the water. See How To
Apply Chemicals/Cleaning Solvents
instructions in this section.
cArTON cONTENTS
Quick Connect Nozzles
Assembly
Chemical Hose
Engine Manual
Nozzle Cleaning Tool
I/J
D
O
N
C
P
R
B
S
A
Wand:
T